Filling machine led to the emergence of a lot of the rapid development of enterprises, in many industries have used, so that the development is very rapid filling machine.

The filling machine in food industry, beverage industry, chemical industry and other widely used, as aquatic product processing, packaging technology and equipment are put forward new requirements. The simple discussion of filling machine in all walks of life development prospect:

Food industry: at present, food packaging machinery, competition is becoming increasingly fierce, the future of food filling machinery will coincide with the industrial automation, the promotion of packaging equipment to improve the overall level of development, multi-functional, high efficiency, low consumption of food packaging equipment. A lot of annual output value of enterprises in the tens of millions of millions of little below, this phenomenon of Chinese packaging industry in the market has occupied the dominant position. But as a result of very rapid development, will also be part of enterprises are facing closure or jobs, while some joined the ranks, extremely unstable, serious obstacle its industry development stability. Therefore, we should change from the market point of view, to ensure the stability and development of.

The chemical industry, filling machine in the industry is most rapid, cosmetics, toothpaste, shoe polish, some products are inseparable from the filling machine filling, a lot of enterprises also accelerated the production and using new equipment to replace the traditional filling equipment, thus accelerating the production efficiency of the enterprise. Because of rapid market consumption, thus the filling machine in daily chemical industry’s rapid development.

The pharmaceutical industry, some of the liquid medicine filling or viscous liquid filling are derived from the filling machine. Such as: essence oral liquid, loquat cream, various pesticides can use liquid or paste filling machine filling machine for filling.

In addition, the chemical industry and special paste or liquid products can use the filling machine for filling, it can guarantee the product quality and reducing pollution.

According to the irrigation objects，filling machine can be divided into water filling machine, carbonated beverage filling machine, tea and hot juice filling machine, milk filling machine, oil filling machine, can filling machine, wine filling machine.

Plastic plasticity characteristics which can be used to produce various products. Because of light weight, convenient carrying, waterproof, so the plastic products are very popular. Shaped products are convenient for storage, and does not require too much maintenance, especially for packing food particularly useful. The milk from the bottle into the furniture, plastic products almost everywhere. But the plastic is toxic and can degrade. Therefore, Plastics Recycle Machines ’s impact on the environment has aroused wide attention, and most countries realize the importance of waste plastics recycling.

Plastic is how to reuse?

First of all, Plastic Recycling Machine to reclaim useless or replaced the waste plastic products. Plastic waste being sent to material recycling, and other recyclable products. Then according to the different type of plastic for classification, finally sent to the recycling plant processing. Here, the plastic on the dirt cleaned up into pieces. Flotation tank according to different density further separation of pollutants. Then the plastic drying, melting, made of particles to plastic products factory production of new products.

Plastic recycling status

Recycling one ton of waste plastic equivalent to savings of 2000 pounds of petroleum, and one two months of water use.

Plastic Recycling Equipment industry in the amount of equipment from 1990 to 1999 increased by 81% ( USA ).

In recent years, the United States of America ’s waste plastic recycling business increased by three times.

The United States the use of recycled Pet Recycling Machine and PE Plastic Bottle Recycling Machine of domestic consumption has exceeded the current recycling ability. This implies an increased need for waste plastics recycling project.

Waste Plastic Recycling Machinery has some shortcomings. One of them is a plastic polymer materials require significant processing process. And dye, filler and other additives is very difficult in the process of removal of circulating.

Beverage bottles and plastic bags are the most common Plastics Crusher Machine , because they usually do not have too much additives.

Textiles, carpets, insulating materials, flower pots and recycling box is one of the few can use recycled plastic products produced.

Waste plastic recycling situation is compared, and paper and glass, plastics recycling industry has lagged behind a lot of. In addition to process complex, and the relatively high cost of factor.

Plastic Recycling Machine can be divided into PP PE Washing Machine , Pet Washing Machine. Plastic Granulator includes PP PE Recycling Machine . Plastic Shredder Machine with single shaft Plastic Shredder machine and double shaft Plastic Crusher machine . Plastic Granulator Machine with plastic film squeezing machine , plastic pipe extruder machine.

1, overview of Filling Machine

Filling classification according to the packaging category there are three main categories: bag, hoses and bottle. Water Filling Machine selection and packaging have close relationship.

The two bottle filling, the production line using artificial semi automatic filling machine, accounted for more than 90% of the total domestic cosmetics ( including foreign ), is the mainstream. Automatic filling, foreign-funded enterprises to use more general, filling machine imported from abroad, in last few years began to use the Chinese development of Automatic Filling Machine and filling machine semi-automatic.

2, cosmetic filling machinery and packaging machinery development and selection of wss80909

At the end of the 70’s and early 80’s, Chinese cosmetic filling, enterprises rely on self-made simple machinery for production, after 80 years of opening up to the outside world, a few state-owned enterprises started a small introduction of foreign Water Filling Machine or homemade development of filling machine. At the end of the 80’s and early 90’s, with foreign manufacturers to enter the Chinese market and foreign capital ( cosmetics ) the establishment of the enterprise, promoted the Chinese cosmetics enterprises development.

After 10 years of efforts, China cosmetic filling and packaging machinery, the domestic has been able to rely on their own development and the foreign products of digestion technology, basically meet the cosmetics industry development needs. The development of Shanghai cosmetic filling machine not only has entered many international well-known cosmetics enterprise in China, such as Shiseido, Coty, CD, Marykay, Revlon, Unilever and so on, in addition to export to Southeast Asia countries and the Middle East countries, since 2001 also exported to the United States of america.

Filling Machine selection depends on the following factors: the material properties ( viscosity, foaming ), filling capacity, bottle shaped and productivity and purchasing power.

(1) for medium and small enterprises, and foreign enterprises, the product varieties, small quantities, or to consider investment under the condition of less, semi-automatic filling machine is a practical choice. At present, the cosmetics production enterprises the most intensive Guangdong region sales.

(2) for many varieties of products, and the batch and large enterprises, is suitable for semi automatic filling machine and Bottle Filling Machine way of combining production.

(3) for new enterprises, product range is narrow, have a certain investment ability, and the company has a certain influence, in order to choose automatic Bottle Filling Machine is suitable for the.

(4) for the product variety main varieties lots, and some varieties of small amount, in order to choose a higher degree of automation of production lines, with a small amount of semi automatic filling machine auxiliary.

(5) effects of type selection of another important factor is often associated with business experience, habits and investment decision making.

Plastic plasticity characteristics which can be used to produce various products. Because of light weight, convenient carrying, waterproof, so the plastic products are very popular. Shaped products are convenient for storage, and does not require too much maintenance, especially for packing food particularly useful. The milk from the bottle into the furniture, plastic products almost everywhere. But the plastic is toxic and can degrade. Therefore, plastics recycling ‘s impact on the environment has aroused wide attention, and most countries realize the importance of waste plastics recycling.

Plastic is how to reuse?

First of all, plastic recycling to reclaim useless or replaced the waste plastic products. Plastic waste being sent to material recycling, and other recyclable products. Then according to the different type of plastic for classification, finally sent to the recycling plant processing. Here, the plastic on the dirt cleaned up into pieces. Flotation tank according to different density further separation of pollutants. Then the plastic drying, melting, made of particles to plastic products factory production of new products.

Plastic recycling status

Recycling one ton of waste plastic equivalent to savings of 2000 pounds of petroleum, and one two months of water use.

Plastic recycling industry in the amount of equipment from 1990 to 1999 increased by 81% ( USA ).

In recent years, the United States of America ‘s waste plastic recycling business increased by three times.

The United States the use of recycled PET and HDPE plastic bottles of domestic consumption has exceeded the current recycling ability. This implies an increased need for waste plastics recycling project.

Waste plastics recycling has some shortcomings. One of them is a plastic polymer materials require significant processing process. And dye, filler and other additives is very difficult in the process of removal of circulating.

Beverage bottles and plastic bags are the most common plastics recycling, because they usually do not have too much additives.

Textiles, carpets, insulating materials, flower pots and recycling box is one of the few can use recycled plastic products produced.

Waste plastic recycling situation is compared, and paper and glass, plastics recycling industry has lagged behind a lot of. In addition to process complex, and the relatively high cost of factor.

Plastic recycling machine can be divided into PP, PE washing machine, PET washing machine. Plastic granulator includes PP PET PE granulator. Plastic shredder machine with single shaft shredder machine and double shaft crusher machine. Plastic extrusion machine with plastic film squeezing machine, plastic pipe extruder machine.

1, domestic stainless steel pipe of thin wall application time is ripe

Thin wall stainless steel tube, the country in the late nineteen ninties began production, use, is the pipe field cut a striking figure new family, have been widely used in building water and direct drinking water pipeline.

Thin walled stainless steel tube durable, has been recognized and engineering, concerned respect is from the reduced wall thickness, lower the price aspect, in order to facilitate further promotion. Especially small diameter stainless steel pipe, the price is not high, thus supporting the connection method, pipe fittings of reliability and price is to decide its development factors. In Sichuan, Guangdong, China Zhejiang, Jiangsu and other places have developers independently developed the connection technology and pipe fittings, is a very promising pipe. The Ministry of construction and the relevant departments attach great importance to this new type of pipe. Thin walled stainless steel tube of this technology and the popularization and application of products to improve the grade of China’s modern architecture, improve and protect water quality has important significance.

At the same time, the Ministry of construction attach great importance to the promotion and application of thin-wall stainless steel pipe. ” Thin-walled stainless steel pipes” industry standard already was released on 2001 implementation. Related pipeline engineering and installation of the Ministry of construction, has been issued by the Tongji University, is responsible for the preparation of. At present, Sichuan, Guangdong, Zhejiang, Jiangsu and other places have professional manufacturers for the production of thin wall stainless steel pipe, the product already hasten is mature period, therefore, to promote the application of the time has come.

2, the domestic market prospects

The pipeline for water supply in building demand

According to the” construction” Nine Five “plan and 2010 compendium of distant view target” estimates, 2001 ~ 2010 years, each pipe demand is 50 ~ 600000 km, wherein the residential building area of cold and hot water demand was 400000 km. Somebody thinks, the development of stainless steel pipe, to improve the city modern building quality, significant.

The rapid development of direct drinking water pipeline

With the development of the national economy, direct drinking water pipeline in the domestic Beijing, Shenzhen, Shanghai, Chongqing and other city development is rapid, economic developed medium city is also actively planning to catch up straight. In drinking water, stainless steel piping is undoubtedly come first on the list. At present the domestic high-grade hotels, public places have configuration or in a configuration of direct drinking water pipeline.

The domestic replace imported promising

In order to promote stainless steel pipe, China from nineteen ninties from reduced wall thickness, reduce the cost aspect, to solve ” high diameter wall ratio and high precision” thin-walled stainless steel tube technical problems, so that the stainless steel tube to receive promotion application, development is very rapid. A pipeline to a comprehensive application, little not domestic. Currently, the domestic has been part of furniture factory preparation production and further development of thin wall stainless steel pipe and pipe capacity.

Stainless steel tube can be divided into welded stailess steel pipe, duplex stainless steel tube, stainless steel U tube, stainless steel hollow bar, and so on.

1, overview of filling machine

Filling classification according to the packaging category there are three main categories: bag, hoses and bottle. Filling machine selection and packaging have close relationship.

The two bottle filling, the production line using artificial semi automatic filling, accounted for more than 90% of the total domestic cosmetics ( including foreign ), is the mainstream. Automatic filling, foreign-funded enterprises to use more general, filling machine imported from abroad, in last few years began to use the Chinese development of automatic filling machine and filling machine semi-automatic.

2, cosmetic filling machinery and packaging machinery development and selection of wss80909

At the end of the 70’s and early 80’s, Chinese cosmetic filling, enterprises rely on self-made simple machinery for production, after 80 years of opening up to the outside world, a few state-owned enterprises started a small introduction of foreign machinery filling or homemade development of filling machine. At the end of the 80’s and early 90’s, with foreign manufacturers to enter the Chinese market and foreign capital ( cosmetics ) the establishment of the enterprise, promoted the Chinese cosmetics enterprises development.

After 10 years of efforts, China cosmetic filling and packaging machinery, the domestic has been able to rely on their own development and the foreign products of digestion technology, basically meet the cosmetics industry development needs. The development of Shanghai cosmetic filling machine not only has entered many international well-known cosmetics enterprise in China, such as Shiseido, Coty, CD, Marykay, Revlon, Unilever and so on, in addition to export to Southeast Asia countries and the Middle East countries, since 2001 also exported to the United States of america.

Filling machine selection depends on the following factors: the material properties ( viscosity, foaming ), filling capacity, bottle shaped and productivity and purchasing power.

(1) for medium and small enterprises, and foreign enterprises, the product varieties, small quantities, or to consider investment under the condition of less, semi-automatic filling machine is a practical choice. At present, the cosmetics production enterprises the most intensive Guangdong region sales.

(2) for many varieties of products, and the batch and large enterprises, is suitable for semi automatic filling machine and filling machine way of combining production.

(3) for new enterprises, product range is narrow, have a certain investment ability, and the company has a certain influence, in order to choose automatic filling machine is suitable for the.

(4) for the product variety main varieties lots, and some varieties of small amount, in order to choose a higher degree of automation of production lines, with a small amount of semi automatic filling machine auxiliary.

(5) effects of type selection of another important factor is often associated with business experience, habits and investment decision making.

Filling machine fine can be divided into water filling machine, carbonated beverage filling machine, tea and hot juice filling machine, milk filling machine, oil filling machine, can filling machine, milk filling machine.

Special equipment for plastics processing refers to plastic processing industry in the use of all kinds of special machinery and equipment. As an important technique equipment, plastics processing equipment widely used in building materials industry, packaging industry, electronic information industry, agriculture, automobile and traffic industry, light industry, petrochemical industry, machinery industry, defense industry and other fields. Special equipment for plastics processing mainly includes the injection molding machine, PET blow molding machine and extrusion blow molding machine.

30 years of reform and opening up, the plastic industry as an important economic industries, with the average annual growth rate higher than the national economy total growth rate. Since twenty-first Century, China plastics industry has made great achievements in the world, has realized the historical spanning. The vigorous development of China’s plastics industry in China, modern economic construction plays a more and more important role. In the plastic industry to develop quickly to drive, special equipment for plastics processing also maintained a rapid development.

China Plastics processing equipment manufacturing enterprises are mainly distributed in the southeast coastal area, the Pearl River Delta area, Ningbo area which has experienced the most rapid growth, China has now become the largest injection molding machine production base, the annual production capacity of injection molding machine for domestic total output of 1 / 2, occupy the world to injection molding machine 1 / 3. Plastic mold industry upgrading, technical innovation also appeared a hitherto unknown gratifying changes. Guangdong Shantou most of the enterprises have the full introduction of Germany, France, Italy and China’s Taiwan Province, the latest computer automation mold processing technology, greatly improving the mold technical performance, quality grade.

At present, China has become the world’s largest plastic machinery consumption country, its consumption accounted for about 20% of the global market, in such a huge market under the temptation, major multinational companies ready to. Plus China the price of factor of production is relatively low, became the big company grabs beach China market power. In recent years, China plastic machinery equipment market has been more and more foreign enterprises, many large international enterprises on the one hand and China plastic machinery enterprises continue to intensify cooperation in depth and breadth, but is more a merger or purchase of shares to hold Chinese plastic machinery market. As de Ma lattice, Cornell and Hongkong Zhenxiong, overseas enterprises have adopted the domestic enterprises and joint ventures, or set up a separate subsidiary or representative office forms to enter the Chinese market.

Plastics machinery industry development relying on plastic raw materials industry, plastics processing industry development. China plastic machinery general development trend is toward combination structure, specialization, seriation, standardization, integration, miniaturization, large-scale, personalized, intelligent direction, at the same time to meet the energy saving, material saving, high efficiency requirements, in order to adapt to the plastic raw materials, plastic products processing enterprises cost need.

From the plastic of the per capita consumption, China’s per capita consumption is only 12 kg, and the developed country is 30 kg to 100 kg, the world average consumption of 18 kg, therefore, China’s plastics industry development foreground is very wide. The development of the plastic industry is bound to promote the development of plastic machinery industry, not only in quantity, but also in technology has put forward higher requirements.

First of all we should pay attention to, why the trampoline and skipping compared to what? The reason is that both are doing jumping up and down movement, skipping is on the ground of small amplitude to jump up and down, while the trampoline is have the aid of equipment greatly jump up and down.

The two movement safety issues should be how to compare? Our point of view is to compare the sports injuries in the accident; two to compare the movement itself brings the side effect problem.

To talk about accidental injury problems: if say generally trampoline than skipping more dangerous, we think this view ignores the basic measure, it is called” exercise”, in the same motion intensity under the premise of accidental injury is meaningful. As a result of skipping movement amplitude is very small, very limited, so the movement is very limited ( whether exercise intensity or controlling risk ), so give people an illusion which is safe, if your trampoline jumping like skipping the height of the words, it is not difficult to imagine is also very safe. Of course, what is not a trampoline jumping rope, its range of jumping, skipping exercise intensity is more violent, environmental equipment is also completely different, in fact, no direct comparison. On the trampoline individually, as an extreme sport and its risk factors still exist. Therefore, to select excellent trampoline equipment and the guidance of coach is vital. This is why we have to actively advocate the safety fitness of trampoline, and not simply trampoline is safe.

The two is to compare the two movement brings the side effect problem. From the motion form of trampoline and skipping is not different approaches but equally satisfactory results. While the trampoline and Skipping Jump range compared to the biggest difference is greatly improved, this is very important, this stroke jumps to the body brought positive action is the one and only. Trampoline in abroad for 80 years, the domestic fitness of trampoline from after 2008 Beijing Olympic Games are also carried out for several years, from our hands to tens of thousands of people to participate in the sport ‘s record, and foreign literature and can’t find the normal use of a trampoline can cause visceral brain injured children or any report. On the contrary, academia thinks generally trampoline is children sensory integration education important means, is to develop children’s vestibular system excellent way. Children come to the world is to face the challenge, to meet the various risks that they must be faced with the fact. While the training of trampoline and motion precisely in fostering children coordination, balance and reaction ability can play a vital role.

Trampoline why special? In fact, the trampoline as a soft surface for movement, in the same motion conditions it is definitely more safe, not like hard rope skipping as a damaged joint.

On a trampoline to hop substantially is a kind of special form of exercise, because in every jump to the highest point you will in weightlessness; and each time the trampoline surface feet contact bounce, you will receive two times the body weight overweight load.

Trampoline jumping up and down and of course is also training the body balance, coordination and a sense of rhythm in the best way, is also a very efficient way to lose weight.

Parents can according to the child size: 8ft trampoline, 10ft trampoline, 12ft trampoline, 13ft trampoline, 14ft trampoline, 15ft trampoline, 16ft trampoline, mini trampoline. There are many shapes of trampoline: oval trampoline, rectangular trampoline, octagon trampoline, mini trampoline.

1, bottle design

The product analysis:

Shower gel is the main component of general: surfactant, vesicle membrane stabilizer, flavor, thickening agent, a chelating agent, skin care agent, pigment. Senior bath also adding some ingredients, such as herbal extract, hydrolyzed protein, vitamins and lanolin derivatives, so that the bath is clean, can promote blood circulation, wetting skin protection, and has the sterilization, disinfection effect. Shower gel is weakly acidic substance.

The design requirements analysis:

The contents of the volume of 125ml, belongs to the small package.

Requirements for the design of hinged lid, you need to consider the whole bottle with lid in the structure size and the overall appearance of the type is consistent.

Design of positioning: To sum up, you can generally take shower gel packaging design for tourist and lightweight. Structure design and is convenient to carry and use, initially set the bottle body section is elliptical or circular; material for plastic bottles; bottle cap adopts hinge cover design.

2, manufacturing materials

Plastic packaging containers to its density is small, lightweight, transparent or opaque, not easily broken; has good corrosion resistance, acid and alkali resistance, oil resistance, impact resistance, and has good mechanical strength; easy processing, as long as the replacement of mold, can get the different varieties of the container, and can form large quantities production, low production energy consumption; good packing effect, plastic variety, easy coloring, bright color, class according to the need to create a variety of different types of packaging containers, to achieve the best effect of packaging and other excellent properties, chemical products, food, beverage, cosmetics, pharmaceuticals and other packaging has been widely used, in many aspects has replaced the wooden container, metal containers, glass, ceramic containers.

The design of the material and choice for the bottle cap: PP, HDPE.

3, determine the manufacturing process

The cap is injection molding method.

Injection process is: melt injection - stereotypes.

Injection molding machine can forming a complex shape, size precision, with metal or non metal insert molded products, high productivity, suitable for bottle cap complex shape. Require the use of injection mold injection molding machine.

The bottle body shaping method is injection blow molding machine.

The note - blowing bottle without flash, good dimensional stability, and excellent quality of bottle mouth threads, the parison thickness uniformity, products of high gloss, no waste generated in the process, saving raw materials. Require the use of injection mold and blow mold.

Finally, as long as the filling machine for filling it.

Boiling steel is made of ordinary carbon structural steel rimmed steel into steel. Boiling steel is a steel deoxidation incomplete, only a certain amount of weak Deoxidizer on steel liquid deoxidation of molten steel, high in oxygen, when the molten metal into steel ingot mould, carbon and oxygen reaction to produce large amounts of gas, resulting in steel liquid boiling, boiling steel named after this. Boiling steel with low carbon content, because no silicon deoxidation in steel, silicon content is low ( Si < 0.07% ). Boiling steel outer layer is in a boiling liquid steel caused by violent agitation under conditions of crystallization into, so the surface layer of pure, dense, good surface quality, good plastic and stamping performance, no large shrinkage, less cutting head, high yield, and boiling steel production process is simple, iron alloy steel low consumption, low cost. Boiling steel used to manufacture all kinds of stamping parts, construction and engineering structure and some less important structures of machine parts. But the heart of rimmed steel impurities, segregation is more serious, organization is compact, with mechanical heterogeneity. At the same time as the gas content in steel is more, so the low toughness, brittle and aging sensitivity larger, welding performance is poor. It is not suitable for the manufacture of boiling steel under impact load, working at low temperature welding structure and other important structures.

Sedation steel are made of ordinary carbon structural steel hot-rolled steel plate made of steel. Killed steel is deoxidized fully steel, steel liquid in ferromanganese, ferrosilicon and casting for aluminum were fully deoxidized molten steel, low oxygen content ( usually 0.002-0.003% ), the liquid steel in the steel ingot mould is calm, do not produce boiling phenomenon, hence the name of steel. Under normal operating conditions, killed steel without bubbles, organizational uniform dense; due to low oxygen, oxide inclusions in steel is less, purity is high, cold brittle and aging trend; at the same time, smaller steel segregation, performance is relatively uniform, high quality. Steel is a concentrated shrinkage, yield is low, the price is higher. Therefore, sedative steel is mainly used to bear the impact of the member under low temperature, high strength welding structure and other components.

Low alloy steel plate is a steel and semi killed steel. Due to high strength, superior performance, can save steel, reduce the structure weight, it has been applied more and more widely.

In addition to boiling steel and sedation steel, steel include cold rolled steel, color coating steel, galvanized steel, hot dipped galvanized steel, prepainted steel.